|A+ Certification Preparation
||CNET 60 (VOC)
- Students completing CNET 60 will be able to analyze types of preventative maintenance products and procedures, and when to use/perform them.
- CNET 60 students will be prepared to take the A+ Certification Exam.
|Advanced Surface Mount Assembly and Rework
||ELEC 62 (VOC)
- In a laboratory setting, students will perform component removal, desoldering, and rework tasks to industry standards.
- Students will demonstrate the ability to solder a surface-mount electronic circuit board to approved industry standards (IPC7711/7721)
|Communications Circuits Theory
||ELEC 53 (VOC)
- Students completing ELEC 53 will be able to interpret amplitude and frequency characteristics of signals displayed on the spectrum analyzer screen.
- Students completing ELEC 53 will be able to calculate the bandwidth and power characteristics of frequency-modulated signals using the table of normalized Bessel functions.
- Define common communication terms used in telecommunication circuits.
- Explain circuit operation of various communication circuits.
- Demonstrate effective use of test equipment during measurements on various communication circuits.
- Calculate and analyze various modulation characteristics using a variety of modulation principles.
- Compare and contrast various parameters of different modulation principles.
- Measure and record parameters of several modulated sources.
- Evaluate and measure the reception effectiveness of several modulated sources.
- Students completing CNET 56 will be able to identify and distinguish among the different media used in network communications.
- Students completing CNET 56 will be able to determine the most appropriate standards, protocols, and access methods for a given network.
- Students completing CNET56 will be able to correctly determine an IPv4 address, broadcast address, and network address from a binary IPv4 address and binary subnet mask.
|Computer Simulation and Troubleshooting
||ELEC 12 (VOC)
- Using MultiSim students will construct and simulate a discrete-component analog circuit.
- Using MultiSim students will be able to locate hidden faults in an analog circuit.
- Course completers will demonstrate the ability to isolate defective components on physical (as opposed to simulated) circuit boards.
- Demonstrate basic computer operating skills.
- Analyze operational circuit parameters when component values are changed.
- Analyze circuits for faults.
- Demonstrate how to troubleshoot circuits, and replace faulty components through simulation.
- Predict circuit operating parameters based on simulated characteristics.
|Customer Relations for the Technician
||TECH 60 (VOC)
- Students completing TECH 60 will demonstrate the ability to answer questions in a positive manner in a mock job interview.
- Students completing TECH 60 will be able to identify qualities employers seek in new hires.
- Describe the benefits of using effective customer contact skills.
- Demonstrate proper customer and team interactions.
- Identify and use customer contact tools.
- Evaluate the effectiveness of appropriately used customer contact tools.
- Know and use effective questioning techniques.
- Compare and contrast ethical decisions made.
- Compare and contrast hard skills versus soft skills.
- Know and use effective communication skills.
- Demonstrate proper responses and appropriate attire in an interview.
||ELEC 56 (VOC)
- Using the design algorithm, students will design and build a combinational logic control circuit.
- Using a state machine design, students will construct a synchronus counter that counts a random number sequence and then repeats.
- Recognize logic symbols and logic interpretation.
- Analyze combinational logic circuits and waveforms.
- Analyze combinational logic circuits and waveforms.
- Demonstrate reduction techniques of combinational logic.
- Analyze sequential logic circuits and wave forms.
- Evaluate logic circuit parameters from truth tables.
- Troubleshoot logic circuits and find faults.
- Measure logic circuit input and output signals using a variety of testing techniques.
|Electronic Assembly and Fabrication
||ELEC 61 (VOC)
- Students will demonstrate the ability to assemble an electronic circuit board to approved industry standards (IPC7711/7721)
- Students will demonstrate the ability to solder a through-hole electronic circuit board to approved industry standards (IPC7711/7721)
- Students completing ELEC 61 will demonstrate the ability to capture a schematic and render a printed circuit board phototool from an instructor-supplied list of component requirements.
- Demonstrate the proper manufacturing techniques of soldering and de-soldering.
- Differentiate between types of assembly techniques and justify the merits of one versus the other.
- Design a printed circuit board using computer-aided drafting (CAD).
- Define or explain various terms used in assembly and manufacturing processes.
- Recognize acceptable assembly connections from unacceptable ones.
|Electronic Devices Theory
||ELEC 51 (VOC)
- Students completing ELEC 51 will be able to determine voltage gain and bandwidth characteristics of a common-emitter transistor amplifier.
- Students completing ELEC 51 will be able to determine expected gain and bandwidth of an operational amplifier.
- Explain operating parameters of various semiconductor devices and circuits.
- Explain system application of various semiconductor devices and circuits.
- Analyze troubleshooting techniques of various semiconductor devices and circuits.
- Measure electrical quantities.
- Analyze various op-amp design parameters.
- Compare and contrast various oscillator types.
- Analyze switching circuits and timers.
||ELEC 50B (VOC)
- Students completing ELEC 50B will be able to employ polar and/or rectangular notation to determine the magnitude and phase shift of an unknown circuit parameter (voltage, current, impedance, and/or power).
- Students will be able to accurately measure amplitude and time parameters of a periodic waveform displayed on the oscilloscope screen.
- Define common terms and recognize symbols used in AC electronics. (MO)
- Analyze operation of AC circuits. (MO)
- Calculate unknown electrical quantities in AC circuits. (MO)
- Measure and record AC electrical quantities. (MO)
- Demonstrate the proper use of test equipment (oscilloscope, function generator, frequency counter) when measuring electrical quantities in a lab exercise. (MO)
- Compare and contrast characteristics of series versus parallel AC circuits. (MO)
- Evaluate the characteristics of frequency selective circuits. (MO)
||ELEC 50A (VOC)
- As a consequence of significant program modification in which electronics math concepts will be covered in the ELEC 50A theory course, students in ELEC 50A will be able to numerically analyze a series-parallel circuit.
- Students completing ELEC 50A will be able to make accurate readings of voltage, current, and resistance using analog and digital multimeters.
- Define common terms and recognize symbols used in DC electronic circuits.
- Explain circuit operation of various DC circuitry.
- Analyze from problems various DC unknown quantities.
- Analyze from schematics various DC unknown quantities.
- Predict unknown electronic quantities before solving electronic formulas.
- Measure and record electrical quantities.
- Demonstrate proper use of test equipment
- Troubleshoot various defects in DC circuitry.
- Calculate unknown electrical quantities in DC circuits.
|Industrial Circuits Theory
||ELEC 54A (VOC)
- Students will be able to explain the operation of industrial electronic components in circuits
- Students will be able to make comparative assessments of direct-current (DC) motor controls
- Define common industrial electronic terms.
- Explain circuit operation of various industrial electronic components.
- Explain circuit applications of various industrial components and basic circuits.
- Analyze various parameters of industrial components and basic circuits.
- Identify various principles of optoelectronic components.
- Compare and contrast various principles of power sources.
- Compare and contrast various DC and AC motor controls.
- Measure circuit parameters for various motor control circuits.
- Explain operation and applications of various transducers.
|Industrial Electronic Systems
||ELEC 54B (VOC)
- Students completing ELEC 54B will be prepared to produce a ladder logic diagram for the control of an industrial process.
- Students completing ELEC 54B will be capable of assessing the quality of a programmable logic control (PLC) program.
- Students will be able to describe the key operational advantages of a PLC factory environment, including input, output, and communication protocols.
- Define common industrial electronic terms.
- Explain circuit operation of various industrial electronic circuits.
- Explain system applications of various industrial electronic circuits.
- Identify Programmable Logic Controller components.
- Differentiate number systems and codes used with common PLCs.
- Demonstrate PLC programming methods.
- Compare and contrast PLC programming methods.
- Synthesize the program (software) to the appropriate hardware electrical connection.
|Intro to Mechatronics
||ELEC 10 (VOC)
- ELEC 10 students will be able to recognize standard symbols used in electronic schematic diagrams.
- ELEC 10 students will demonstrate proficiency in the assembly and programming of an electromechanical system
|Lab Studies Electronics
||ELEC 81 (VOC)
- Students will demonstrate the ability to perform research necessary to obtain information sufficient to complete a semester project of the student's choosing.
- Students will demonstrate the ability to produce a project timeline showing procedural steps, critical tasks, and goals.
- Select a project idea that meets the need of the student.
- Research requisite information required to complete the project.
- Demonstrate proper use of lab equipment while working on project.
- Plan procedural steps in order to facilitate project completion.
- Demonstrate completed project and report outcomes.
||ELEC 74 (VOC)
- Students completing ELEC 74 will be able to install programs and development tools into microcontrollers or companion personal computers
- Students completing ELEC 74 will be able to describe the relationship between hardware and software in a microcontroller.
- Students in ELEC 74 will use different types of microcontroller platforms (such as Arduino or Fubarino) to implement projects of their own design.
- Program a PIC microcontroller using a development board.
- Compare and contrast various features of different process control circuits.
- Demonstrate the use of interfacing devices in circuit operation.
- Compare and contrast various features of different interfacing devices.
- Program the PIC using the C programming language.
- Demonstrate a functional interface control circuit for a process control circuit.
- Compare and contrast features of various types of PLDs.
||ELEC 55 (VOC)
- Using laboratory equipment students will demonstrate the presence of standing waves on a microwave transmission line.
- Students completing ELEC 55 will be able to use the Smith chart to match line and load impedances.
- Students will be able to demonstrate the proper operation of laboratory equipment and correct interpretation of measured results of microwave power (both in milliwatts and dBm) and of standing wave ratio (SWR) as both a voltage ratio and in decibel units in a waveguide-based setup. Both measurements will be made with analog test equipment found in the microwave laboratory.
- Define common microwave terms.
- Explain circuit operation of various microwave components.
- Explain system applications of various microwave components.
- Calculate and analyze various microwave characteristics.
- Plot graphically and analyze various microwave characteristics on the Smith Chart.
- Compare and contrast Smith Chart values from those obtained by formula.
- Measure common microwave parameters using microwave test equipment.
|Network+ Certification Preparation
||CNET 62 (VOC)
- Students completing CNET 62 will be prepared to pass the CompTIA Network+ examination.
- CNET 62 students will demonstrate understanding of basic network structures.
|PC Operating Systems
||CNET 52 (VOC)
- CNET 52 students will demonstrate the ability to obtain technical information from each Windows operating system.
- Students completing CNET 52 will be able to install Windows operating systems.
||CNET 50 (VOC)
- Students completing CNET 50 will demonstrate effective troubleshooting strategies for isolating faults in all major personal computer (PC) subsystems and components.
- Students in CNET 50 will be able to define common terms and recognize symbols used in PC systems.
- Students completing CNET50 will be able to add/remove input and output devices properly on computer systems running current operating systems.
||CNET 54 (VOC)
- Students completing CNET 54 will be able to identify component-level malfunctions in a typical personal computer.
- Students completing CNET 54 will be able to demonstrate proper use of specific and general-purpose diagnostic aids available to the PC technician.
|Preparation for Work Experience
- Student will be able to complete a resume and cover letter to describe their work experiences.
|Radio Telephone Communications
||ELEC 76 (VOC)
- Students attempting to obtain a ship-radar endorsement will successfully complete NARTE examination
- Students completing ELEC 76 will successfully pass Elements 1 and 3 of the Federal Communications Commission General Radiotelephone Operator License examination.
- Identify the requirements of the various FCC communication licenses.
- Apply electronic principles as they apply to the Element 3 license.
- Explain pertinent communications-related rules and regulations covered in the Element 1 license examination.
- Solve electronic math problems.
- Identify circumstances where possession of GROL is federally mandated for communications technicians in the marine and aviation radio services.
|Security + Certification Preparation
- Students completing CNET 66 will be able to "harden" an operating system to protect computers from security threats.
- Students completing CNET 66 will be prepared to pass the CompTIA Security+ examination.
- Students completing CNET66 will be able to recommend risk mitigation and disaster recovery strategies to an organization.
|Server + Certification Preparation
- Students completing CNET 64 will be able to install servers into a network environment.
- Students completing CNET 64 will be prepared to pass the CompTIA Server+ examination.
- CNET64 students will demonstrate understanding of storage system fault tolerance.
- Students completing CNET58 will be able to install and configure local and network storage systems including SAN, NAS, RAID, etc., using current technologies.
- Students completing CNET58 will be able to install current network operating systems on both physical and virtual environments.
|Technical Applications in Microcomputers
||ELEC 11 (VOC)
- Students completing ELEC 11 will demonstrate the ability to produce a correctly formatted and error-free employment cover letter using Microsoft Word.
- Students completing ELEC 11 will be able to produce an expense spreadsheet with a chart in Microsoft Excel.
- Students completing ELEC 11 will demonstrate the ability to produce a correctly formatted and error-free resume in Microsoft Word
- Demonstrate various features of the Windows operating system specifically used in electronic technology.
- Define and discuss common vocabulary words associated with technology and computers.
- Design and implement various word processing assignments including: memos, technical reports, and a resume.
- Design and implement various spreadsheet assignments including data in chart and graph form.
- Implement various database assignments including data manipulation, report generations.
- Identify features of computer presentation methods.
- Demonstrate using the internet to research a given topic.
- 70% of students will produce a spreadsheet with an accompanying chart with no more than two errors in formulas.
|Work Experience in Electronics
- Employers of Electronics & Computer Technology Work Experience students will rate the technical skills of their students as above average.
- Employers of Electronics & Computer Technology Work Experience students will rate the work habits of their students as above average.
- Demonstrate job competence of assigned duties while at the job site.
- Expand responsibilities or learning opportunities beyond those experienced during previous employment.
- Develop an occupational goal to which the work experience will contribute.
- Demonstrate correct operation of equipment.
- Demonstrate good work habits.
- Follow procedures and protocols already in practice at the work site.